14
OPERATION
Refrigerator/Freezer - Starting-up and
Temperature Regulation
Insert the plug into the wall socket.
Open the refrigerator door and turn the thermostat
knob, to be found on the upper right side of the inner
liner, clockwise, beyond the «O» position (STOP), to
start the appliance.
Temperature adjustment is obtained by turning the
thermostat knob to the required setting. A medium
setting is generally the most suitable.
However, the thermostat knob setting should be ad-
justed depending on the temperature required inside
the appliance. This, in turn, depends on a number of
factors such as the ambient temperature, the number
of times the door is opened, the quantity of food
stored and the location of the appliance.
Turn the knob clockwise, to higher numbers, to obtain
a lower temperature, or anticlockwise if a higher tem-
perature is required.
Important:
If the ambient temperature is high and the appliance is
set to the lowest temperature, it may run continuously
causing frost to form on the rear wall. In this case the
dial must be set to a higher temperature to allow for
automatic defrosting and consequently a saving in
electricity consumption.
Fresh food refrigeration
To obtain the best performance, do not store warm
food or evaporating liquids in the refrigerator; do cov-
er or wrap the food, particularly if it has a strong fla-
vour.
To help you use your refrigerator correctly, here are
some more useful hints:
Raw meat (beef, pork, lamb & wild fowl): wrap in
polythene bags and place on top of the salad crisper
and, for safety, only store in this way for one or two
days at the most.
Fruit & vegetables: these should be thoroughly
cleaned and placed in the bottom salad crisper.
Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or pol-
ythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.
Movable wire shelves
Fig. 4
The walls of the
refrigerator are
equipped with a
series of runners
so that the
shelves can be
positioned as
desired.
Storage door accessories
The shelves can be easily removed if they are to be
cleaned or positioned at different heights. To do that,
pull them outwards (see Fig. 5).
Fig. 5
D040
D057
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels